TrioDrive D
TrioDrive D servo drives are available for replacement needs only. Please see Servo Drives New Generation or TrioDrive D/xS for current series of digital AC servo drives with similar power.
Characteristics of the TrioDrive D Servo Drives
- Digital servo drives for AC servo motors
- Compact drives for control cabinet installation, complete with built-in power supply for direct connection to 230 V AC
- Design conforms to EMC requirements (CE marked; class A standard, class B through accessories)
- Full digital servo drives with 2 processors: signal processor and 16-bit microcontroller
- High dynamics and control quality through signal processor for digital control of current and speed (controller cycle time 62.5 µs)
- Position control loop (cycle time 1 ms) integrated, setting the target positions via communication interfaces (standard) or internal positioning control with 500 blocks (option)
- 8 digital inputs, 4 digital outputs
- Pilot frequency mode (pulse, direction inputs same as stepper motor controls) as an option
- Communication via one serial port, RS 232C (standard) and optionally Interbus, CANopen, or Profibus-DP according to DRIVECOM profile 22
- Easy wiring, since all connections can be plugged in at the front and at the top
- Comfortable commissioning using a personal computer
- Operating modes and technology functions in command mode or program mode*: torque mode, speed mode, profile position mode, electronic gearing, flying shear*, electronic cam disk*, fine interpolation*
(* = optional)
Technical Specifications
| Order number | BN 6751 | BN 6752 | BN 6753 * |
|---|---|---|---|
| Mains connection | 230 V∼ ±10%, 50 .. 60 Hz | ||
| DC-bus voltage | 320 V DC | ||
| Rated current, rms value | 2 A | 4 A | 6 A |
| Peak current (crest value) | 5.5 A | 11 A | 17 A |
| For AC servo motors – Rated torque – Shaft power |
up to 1.0 Nm up to 0.5 kW |
up to 3.5 Nm up to 1.0 kW |
up to 5.0 Nm up to 1.5 kW |
| Switching frequency | 16 kHz | ||
| Control supply voltage | 24 V DC ±20%, 0.8 A | ||
| Dimensions ** w×h×d | 85 × 175 [195] × 200 mm | ||
* Operation of the BN 6753 drive (6 A device) is permissible without restriction at a loading of 70% or less. At higher loading, the device has to be mounted next to a control cabinet fan or has to be equipped with a subassembled fan.
** without [with] mounting straps
As a replacement for the servo drives BN 6751 to BN 6753 we can offer you Servo Drives New Generation or TrioDrive D/xS servo drives. Please contact us if required.